Remington

The following instructions and recommendations are based on the data gathered through our 15+ years in the market. We do our best to list most brands and as many models as possible. We also try to make sure the information provided is accurate but please note, manufacturers can make running changes that we are not aware of until reported by a customer. We do our best to list those exceptions but keep in mind this is just a guide and the best way to troubleshoot an installation is to interact with a Technical Support Specialist either over the phone or via e-mail.

Some Remington models come with a Fixed Line head. Due to the adapter needed for the installation, the selection of GrassGator heads that will fit these models is limited. Please follow the special instructions and recommendations below.

We fit most models that come with Bump and Feed style heads.

The fastener required for most installations comes in the kit including the bolt for the Fixed Line models.

Recommended Heads

For straight shaft models 27cc or more that come with a Bump & Feed style head we recommend the following GrassGator models: 3600, 4600, 4620, 4680, 3630, 7800, 4750, 5600, 5620 or 8010.

For curved shaft trimmers that come with a Bump & Feed style head or straight shafts less than 27ccs we recommend the following GrassGator models: 3600, 4750, 5600, 5620 or 8010.

For trimmers that come with a Fixed Line head regardless if they are straight or curved we recommend the following GrassGator models: 3600, 5600, 5620 or 8010.

Installation Instructions

Most curved shaft models that come with a Bump & Feed style head follow the curved shaft instructions while straight shafts with Bump & Feed heads follow the straight shaft instructions.

Fixed line head models follow these instructions.

If you need additional information or would like to help us keep our database up to date by reporting a successful installation on a particular make and model, please Contact Us.

Back To Brands