PO Box 2025, Lincoln, CA 95648
Remove the safety screws
Put the head back together
Remove the safety screws
With the GrassGator head off your trimmer, undo the 3 safety screws. You can now pull the top and bottom halves of the GrassGator apart to expose the pins.
Install new blades
Put the head back together
Remove the safety screws
Remove the old blades and install the new blades on the pins.
Put the head back together
Put the head back together
Put the head back together
Close the head making sure the pins are completely inside the holes on the bottom half. The blades should pivot but you shouldn't see the pins. Re-do the safety screws and lock nuts and re-install the GrassGator head on your trimmer.